Click on the image to check the artwork
Multi-stage cylinders ,allow for a long stroke while maintaining a short retracted length This is achieved with 2 or more nested stages which help to achieve a longer working stroke than a single-stage rod-style actuator is capable of.
Zhongxin's technical sales and engineering teams have extensive experience designing cylinders from a set of specifications or even a conceptual idea.
- 2-stage Telescopic cylinders
- 3-Stage Telescopic cylinders
- 4-Stage telescopic cylinders
- 5-Stage telescopic cylinders
Zhongxin produced thousands of telescopic cylinders to Europe,Australia and America markets.
Zhongxin Introduction :
Zhongxin was esablished in 2008 with 70 empolyees and mainly for hydraulic cylinder production .We 've regularly exported to America, Australia and European countries.
Manufacturing Capacity :
Bore diameters up to 1,000mm
Strokes up to 18,000mm
Pressures up to 70Mpa
Quality Process:
Our manufacturing operations are certified to ISO9001&TS16949
Process and quality maintained through continual auditing
- 15+ YEAR MANUFACTURING EXPERIENCE
- RICH EXPERIENCE IN THE AFTERMARKET&OEM MARKET
- 1 YEAR FULL WARRANTY
- One STOP HYDRAULIC SUPPLIER
- FACTORY DIRECT SAVINGS
- CUSTOMIZED SERVICE AVAILABLE
- DESIGN SERVICE AVAILABLE
- SAMPLE SERVICE
- SERVE OVER 100+ CUSTOMERS FROM 20+ COUNTRIES
Q: 1.What kind of products do you sell?
A: We specialize in hydraulic cylinders and cylinder components.
Q: 2.What are Your Lead times for standard Cylinders?
A: Generally ,It will be longer for the 1st order, because we need to issue all the set production drawings ,and some details need to double confirm. it is about 40-45 days .
For 2nd and following order, It is about 30-35 days after the deposit received.We can discuss if some special status.
Q: 3.Do you Provide technical Assistance?
A: Yishui Zhongxin Machinery Co.,ltd is supported by a team of dedicated and experienced hydraulic design engineers with years of knowledge in the working of hydraulic cylinders.
Q: 4.Warranty?
A: Generally,Zhongxin Machinery will replace or repair defective articles for free Within 1 years from time of the delivery.
This warranty doesn't cover damages caused by the use of defective articles,worn out articles,wrong use of the
articles,non-observance of both above mentioned general instructions for first installation and warning ans safety measures for dumpers,as well as obvious tampering of articles.
Zhongxin's obligation is subject to confirmation of the claim by our inspection Dep.
Generally ,We can deduct the compensation value or send a new one or a new seal kits set in the following order.
Warranty Procedures
1,Description of failure
2,Cylinder model and manufacturing date as laser engraved on all cylinders
3,Invoice Number and Date
Q: 5,Seals
A: NOK(Japan),Hallite(UK),TRELLEBORG(Sweden),ASTON(Italy),Kaden(Italy),or as your requirements
http://www.zxhydraulicmaker.com/